Bicicleta specialized Stumpjumper Evo Comp 2022
DOPPIO/SAN
S1
Lo sentimos este producto está agotado en estos momentos. Pulsa aquí para ver otros productos similares.
- Click & Collect gratis
- Financia tus compras
Características bicicleta specialized stumpjumper evo comp 2022
Bicicleta de carbono Stumpjumper Evo Comp, con horquilla Fox de 36 mm con 150/160 mm de recorrido, transmisión Sram GX/NX Eagle de 12 velocidades y frenos Sram Code de 4 pistones, para uso All Mountain/ Enduro.
Montaje:
- Cuadro: FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger.
- Swat: Increased-volume SWAT™ Door integration with 22oz SWAT™ Bladder
- Amortiguador: FOX FLOAT X Performance, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSR adjustment, S1:210x50mm, S2-S6:210x55mm
- Horquilla: FOX FLOAT 36 Rhythm, GRIP damper, two position Sweep adjustment, 15x110mm QR axle, 44mm offset, S1:150mm of travel, S2-S6:160mm of travel
- Potencia: Alloy Trail Stem, 35mm bar bore
- Puños: Specialized Trail Grips
- Manillar: Specialized, 6061 alloy, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm width
- Sillín: Bridge Comp, Hollow Cr-mo rails, 155/143mm
- Frenos: SRAM Code RS, 4-piston caliper, hydraulic disc, 200mm
- Desviador: SRAM GX Eagle, 12-speed
- Mando de cambio: SRAM GX Eagle, 12-speed
- Cassette: SRAM XG-1275, 12-speed, 10-52t
- Cadena: SRAM NX Eagle, 12-speed
- Bielas: SRAM X1 6K, DUB, S1:165mm, S2-S5: 170mm, S6: 175m
- Plato: Alloy 30T
- Pedalier: SRAM DUB, BSA 73mm, threaded
- Llantas: Specialized 29, hookless alloy, 30mm inner width, tubeless ready
- Buje delantero: Alloy, sealed cartridge bearings, 15x110mm thru-axle, 28h
- Buje trasero: Alloy, sealed cartridge bearings, 12x148mm thru-axle, 32h
- radios: DT Swiss Industry
- Neumático delantero: Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3"
- Neumático trasero: Eliminator Purgatory, GRID casing, GRIPTON® T7 compound, 29x2.3"
- Cámaras: Standard, Presta valve
- Tija de sillín: X-Fusion Manic, infinite adjustable, two-bolt head, bottom mount cable routing, remote SLR LE lever, 34.9, S1: 100mm, S2: 125mm, S3: 150mm, S4/S5: 175mm, S6: 190mm
- Cierre de sillín: Alloy, 38.6mm
*Algunos componentes o especificaciones podrían sufrir cambios por parte del proveedor sin previo aviso*
Descubre más productos