mavic Wheel Wheels XA Pro Carbon 27,5'' WTS 2.4
- Free click and collect
- Finance your purchase
Features mavic wheel wheels xa pro carbon 27,5'' wts 2.4
Carbon wheels for MTB
Rim fully carbon XA Pro Carbon offering great lateral rigidity, to master the descent and overcome the climb. The studied fabric of the fibers provides the maximum vertical absorption. Radiation to two crosses, front and back, provides comfort and control. Super light rim with profile without inner tabs (hookless), which increases the resistance and reduces the possibility of sudden losses of air, and UST compatibility. Optimized for XC competition, interior width 23 mm (28 mm outside) perfect for mounting with covers from 2.1 "to 2.25".
Asymmetric rim that allows you to customize the radiating to complement the characteristics of the rim at the most. Balances tensions, uses 24 spokes on both wheels, steel conificated and three crosses on both sides, to achieve a balance between lateral rigidity and vertical absorption.
The bushings are available only in the ISO version with 6 screws for the disc, and are compatible with the standard frame sizes (15x110 and 12x148) and Boost (15x100) and 12x142). The freewheel is Shimano / Sram or XD (Sram Eagle compatible). In addition, a Lety 60 / Offset (AI) version for the Cannondale is available. For greater longevity of the wheel, Mavic recommends that the total weight supported by the wheels does not exceed 120 kg, including the bicycle. Category ASTM 3, MTB with jumps less than 61 cm.
Features
- Material: 100% unidirectional carbon fiber.
- Rim without inner eyelash (hookless).
- Diameter of the orifice of the 6,5 mm tube.
- Pneumatic: UST Tubeless and with camera.
- Delivered with Tubeless rim bottom, multifunction adjustment wrench, quick release adapters, UST valve and accessories, quick closures Bx601.
- Approximate weight of the front wheel 715 g and approximate weight of the rear 835 g.
Discover more products