- Free click and collect
- Finance your purchase
Features kcnc jockey jockey whell 12d
Colored lightweight wheel made of 7005 aluminum and CNC finish for the rear change. Interchangeable, valid both for use as guide and tension sheave. Compatible with some SRAM changes (see table below) and all Shimano, and both for mountain and road. In the case of the 13-tooth pulley it is advisable to use it only to replace the tension pulley (the lower one). In the case of replacing both sheaves by the KCNC of 13 teeth, it may happen that in large sprockets the sheave rubs with the sprocket itself, although this can be avoided (depending on the length of the leg of the change and the number of teeth that have the large pinions) with the screw that regulates the tension of the change, taking into account that it has a limit of movement. In many changes of road and some of short-sleeve mountain the 13-tooth pulley does not enter (both the guide and the tension), when rubbing with the eyelashes that "unite" the two plates of the leg of the change, but this problem is solved by eliminating those tabs. - Weight: 10 gr. - Sealed bearings. - Available in 10, 11 and 13 teeth. - Lighter than conventional sheaves to be built in aluminum. - They better evacuate mud and dirt through their holes. - The indicated price corresponds to one unit. 10D - Compatible with Shimano and Campagnolo. 11D - Compatible with Shimano, Campagnolo and Sram X0 10V. 13D - Compatible with changes Shimano SGS (long box) without being modified and short box eliminating the tabs that join the plates of the gearbox.Discover more products